FRP Rods-for Composite Insulator Core Rods/ Fiberglass Rods/ Epoxy Rods

Fiberglass Rod  FRP Rods for Composite Insulator:1. Capacity of fiber glass rod/fiberglass rod: 100 Pultrusion lines, the largest manufacturer of composite insulator rods in China.2. Technique of fiber glass rod/fiberglass rod : The only one using vacuum injection technique without mould release agent, Patent No.

Featured Products

Fiberglass Rod  FRP Rods for Composite Insulator:

1. Capacity of fiber glass rod/fiberglass rod: 100 Pultrusion lines, the largest manufacturer of composite insulator rods in China.

2. Technique of fiber glass rod/fiberglass rod : The only one using vacuum injection technique without mould release agent, Patent No. 200610041850.1.

3. Test of fiber glass rod/fiberglass rod : Rods passed tests in domestic labs, including WHVRI, CEMT, XIHARI, especially passed KEMA tests in the Netherlands and 7200h stress corrosion test.

4. Standards: IEC61109 IEC61952, ANSI C29.13-2000, GB/T19519, DL/T810 DL/T864

5. Application: The rods of Taporel have been applied in the highest voltage(1000kv) AC transmission lines & applied in the highest voltage(± 800kv) DC transmission lines.

2. Specifications:

Diameter 5mm-130 mm; Length according to customer's order

3. Classify:

3.1Based on properties, rods are classified into High temperature resistant type (E-glass Rod) and High temperature & acid resistant type (ECR-glass Rod).

3.2Based on properties, rods are classified into High temperature resistant type (E-glass Rod) and High temperature & acid resistant type (E-glass Rod)
3.3Based on application, fiberglass rods are classified into 7 types:
For composite suspension & tension insulators (Diameter 16mm- 40mm)
For composite pin insulators((Diameter 24mm---53mm)
For composite cross arm insulators(Diameter 28mm- 80mm)
For composite post insulator (Diameter 28mm- 130mm)
For composite surge arresters(Diameter 5mm- 40mm)
For composite fuse cutout (Diameter 19mm- 36mm)
3.3. Color: Light green, brown, black

no
 
parameter
 
unit
 
specification
 
1
 
Density(at 20±2)
 
g/cm 3
 
2.2
 
2
 
Water absorbtion rate (at20±2,24h)
 
%
 
0.05
 
3
 
Tensile strength
 
Mpa
 
1690
 
4
 
Bending strength
 
Mpa
 
1100
 
5
 
Dry penetration test
 
Min
 
50
 
6
 
Water difussion test(1%nacl,boiling for 100h 12kv/1min)
 
μA
 
<10
 
7
 
Shearing strength along laminals
 
Mpa
 
50
 
8
 
Volume resistivity(140,96h)
 
Ω.M
 
10 10
 
9
 
DC withstand voltage(10min)
 
kV
 
50
 
10
 
Lightning surge withstand voltage(100kv,10mm)
 
times
 
5
 
11
 
Bending strength at heating conditions
 
Mpa/150
 
350
 
12
 
Stress corrosion (1 mol/1hno3,at 67% stress)
 
h
 
7200
 
13
 
Torsion strength
 
Mpa
 
800
 
 

2. Our products:
 
FRP Rods-for Composite Insulator Core Rods/ Fiberglass Rods/ Epoxy Rods


3. Our worshop:
FRP Rods-for Composite Insulator Core Rods/ Fiberglass Rods/ Epoxy Rods


FRP Rods-for Composite Insulator Core Rods/ Fiberglass Rods/ Epoxy Rods

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours