Ruby Tipped Winder, Coil Winding Ruby Nozzle

Ruby Tipped Winder , Coil Winding Ruby Nozzle HARTAI TECHNOLOGY INDUSTRY Co., Ltd is professional supplier for coil winding wire guide nozzle(tungsten carbide coil winding nozzle), wire guide tubes, wire guide eyelets, wire guide needles at competitive price.Ruby tipped coil winding nozzle guides(ruby nozzle) are used

Featured Products

Ruby Tipped Winder , Coil Winding Ruby Nozzle
 
HARTAI TECHNOLOGY INDUSTRY Co., Ltd is professional supplier for coil winding wire guide nozzle(tungsten carbide coil winding nozzle), wire guide tubes, wire guide eyelets, wire guide needles at competitive price.
Ruby tipped coil winding nozzle guides(ruby nozzle) are used on coil winding machines and cable machines for wire guide. It is made of stainless stee and ruby by precise processing and combination. The rigidity of ruby is above than level 9 and is just less than that of diamond. Ruby tiped coil winding nozzle guide is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and ling term continual work.
Ruby Tipped Winder, Coil Winding Ruby Nozzle
Ruby Tipped Winder, Coil Winding Ruby Nozzle

Ruby tiped coil winding nozzle guides Features:

1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.

2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.

3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.

4. Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Ruby Tipped Winder, Coil Winding Ruby Nozzle
Ruby Tipped Winder, Coil Winding Ruby Nozzle

Specification:
Measurements:
Customize available by requested, outside diameter is governed by nozzle wall thickness. See the measurements drawing to confirm your nozzles measurements according to your winding machine and coil products.
Ruby Tipped Winder, Coil Winding Ruby Nozzle

Processing limit: D1≥ 0.2mm, D1≥ 0.7mm
NOItemNameModel No.(mm)
LL1DD1d1d2H
R2 Series
1R2-001RN0326-2-100626621.00.30.6---
2R2-002RN0326-2-080626620.80.30.6---
3R2-003RN0330-2-080730720.80.30.4---
4R2-004RN0326-2-1006266210.30.6---
5R2-005RN0330-2-080730720.80.30.4---
6R2-006RN0330-2-0810301020.80.30.4---
7R2-007RN0530-2-1008308210.50.5---
8R2-008RN0535-2.5-141135112.51.40.50.8---
9R2-009RN0635-2-1610351021.50.50.8---
10R2-010RN0535-2.5-121035102.51.20.50.8---
11R2-011RN0530-2-120830821.20.50.8---
12R2-012RN0830-230 220.80.8---
R3 Series
1R3-001RN0330-3-100730731.00.30.8---
2R3-002RN0330-3-080730730.80.30.6---
3R3-003RN0430-3-1210301031.20.40.6---
4R3-007RN0530-3-1311301131.30.50.8---
5R3-008RN0323-3-1007P237310.30.816
6R3-009RN0514-3-1509P14931.50.50.66
7R3-010RN0311-3-1006P116310.30.65
8R3-011RN0530-3-1455305.531.40.50.6---
9R3-012RN0330-3-1535P303.531.50.30.513
10R3-013RN0330-3-10123012310.30.6---
11R3-014RN0821-3-2015P2115320.816
12R3-015RN0615-3-150515531.50.60.6---
13R3-016RN0530-3-20143014320.50.5---
14R3-017RN0426-3-120826831.20.40.6---
15R3-018RN0414-3-130914931.30.40.6---
16R3-019RN0334-3-1035P343.5310.30.68
17R3-020RN1030-3-2514301432.511.2---
18R3-021RN0522-3-1608P22831.60.50.814
19R3-022RN1030-3-201453014.53211.2---
20R3-023RN08115-3-2006P11.56320.81.15
21R3-024RN15115-3P11.5**3**1.525.5
22R3-025RN08145-3-2085P14.58.5320.80.86
23R3-026RN10105-310.5**3**11---
24R3-027RN1014-314**3**11---
25R3-028RN0825-3-2520252032.50.81---
26R3-029RN0829-3-20152915320.81.2---
27R3-030RN0630-3-1465306.531.40.60.8---
28R3-031RN0545-3-1315451531.30.50.6---
29R3-032RN0630-3-140630631.41.20.6---
R4 Series
1R4-001RN0843-4-2014P431442.00.80.820
2R4-002RN0843-4-2014P431442.00.81.020
3R4-003RN0330-4-1515301541.50.30.6---
4R4-004RN0340-4-1006406410.30.6---
5R4-005RN1043-4-2514P431442.511.220
6R4-006RN08285-4-201528.515420.81.2 
           

Company Info
HARTAI Technology Industry Co., Ltd , found in 2001, is a professional export company specializing in  coil winding machine accessories ,such as nozzle (moto nozzle, tungsten cabide nozzle, ruby nozzle, ceramic nozzle ),stainless steel wire guide pulley, ceramic roller ,ceramic parts ,wire tensioner and so on .
Ruby Tipped Winder, Coil Winding Ruby Nozzle
Ruby Tipped Winder, Coil Winding Ruby Nozzle
 
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours